X5 Combo CNC milling machine focused on tapping the most advanced human-machine communication interface, display the information from time to time by MPG handwheel convenient electronic control of each axis of movement. Milling CNC machine tools based entirely on the design and manufacture, reflects the structural integrity of facilitate future design ideas. a collection of double-nut ball screw, bearings and couplings with high precision positioning, while adding an automatic oil lubrication system, to protect your machine precision, extended service life.device closed sheet-metal body design is modular , compact, easy to move. to ensure that the use of the environment clean.X5 Combo with a 3-axis servo motor system, with 3-axis high-precision HIWIN rail line, the feed rate of up to 160mm / s, using 7.0Nm motor with frequency converter sets up the machine to achieve efficient operation, BT30 spindle 5000 rpm, rigid tapping to 2000 rpm, can be used with pneumatic tool change structure. is the most cost-effective server market, tapping on CNC milling machine.
Feature |
-Pre-installed DELL PC,Mach3 software |
-The table size -522 x 160mm |
-5000 Switch to precision high-speed spindle, NSK spindle bearings |
-Rigid tapping speed of up to 2000 rpm, M2 thread |
-7.0Nm AC variable frequency motor drive with Delta VFD |
-High-speed high torque servo motor |
-220V single-phase AC power supply |
-NT30 spindle metric or imperial size R8 |
-Pre-installed high-speed cooling fan 1 x 120mm -Selection of high-quality casting materials, compact |
-Taiwan's imports of hiwin linear |
-Imported from Taiwan OEM PMI double nut ball screw Intime |
-Safety electrical components of high quality and fast plug |
-Automatic lubrication system pre-installed to protect the rail life |
-Fully enclosed sheet metal systems |
-Pre-installed fourth axis fast interface |
-Pre-loaded hand wheel controller MPG |
-CE and CCC safety certification |
Specification |
|
Dimensions (L x W x H) |
- 1250mm x 1450mm x 1950mm |
Package dimensions (L x W x H) |
- 1350mm x 1500mm x 2000mm |
Table size |
- 522mm x 160mm |
T-slot size |
- 12mm |
Weight |
- 550 ~ 600kg |
Working travel |
- X-axis: 280mm |
Spindle Speed |
- 200 ~ 5000rpm/min |
Spindle Power |
- 1.1kw |
Spindle taper |
- NT30/R8 |
Input voltage |
- 220v single phase AC |
Positioning accuracy |
- ≤ 0.01mm |
Clamping tool diameter can be |
- 4 ~ 16mm |
Feed rate |
- X / Y axis: 10000mm/Min - Z-axis: 10000mm/Min |
Motor torque |
- X-axis servo motor: 3.2Nm |
Ball Screw |
- P5 Level Double nut ball screw PMI |
Linear guideway |
- USB, RS232 Interface: data transfer |
Output port |
- USB, RS232 Interface: data transfer |